Professional cryotherapy systems vary widely in price depending on technology (nitrogen vs. electric), capacity, build quality, and included services. This guide explains the main cost drivers, typical price ranges, and ongoing expenses so you can budget with confidence. Key Cost Drivers Cooling Technology: Nitrogen-cooled units use liquid nitrogen (LN2); electric units use compressor-based refrigeration. Capacity & Throughput: Pre-cool time and cycle time determine how many sessions per hour you can run. Construction & Safety: Cabin materials, sensors, oxygen monitoring (for LN2 rooms), and compliance features. Service Package: Delivery, installation, training, warranty, and after-sales support. Typical Price Ranges (New Equipment) Exact pricing depends on brand, options, and region; the ranges below are indicative for professional setups. Nitrogen-Cooled Cryosauna: approx. €70,000–€120,000 for a modern open-top unit with training and basic install. Electric Cryosauna: often higher upfront due to compressors and heat exchangers; many projects land from ~€90,000 up to €150,000+ depending on performance and features. New vs. Used / Refurbished Used: Lower upfront cost, but check compressor hours (electric), dewar/tank interfaces (nitrogen), sensor condition, and service history. Refurbished: May include limited warranty and new wear parts; verify what’s covered and who performs service. Installation & Site Costs Electrical: Electric units typically require dedicated power (often 3-phase). Budget for wiring and breakers as per spec. Ventilation: Nitrogen rooms need appropriate ventilation and often oxygen monitoring; electric units need heat rejection/airflow. Room Prep: Flooring, clearances, and access for delivery and maintenance. Ongoing Running Costs Nitrogen-Cooled Units LN2 Supply: Regular deliveries; consumption depends on cycle time and ambient conditions. Logistics: Dewar rental/handling and safe storage practices. Electricity: Lower than electric units for cooling, but still needed for controls and auxiliaries. Electric Units Electricity: Primary operating cost (compressors and fans). Maintenance: Preventive service on refrigeration components improves uptime and consistency. Service, Warranty & Training Training: Operator certification, safety protocols, and client workflow. Warranty: Coverage length, parts/labor, and response times. Support: Remote diagnostics, spare parts availability, and on-site service options. Example Budget Breakdown (Indicative) Item Nitrogen-Cooled Electric Machine (new) €70k–€120k €90k–€150k+ Installation & room prep €3k–€10k €5k–€15k Initial training Included or €1k–€3k Included or €1k–€3k Annual maintenance €500–€2k (plus LN2 logistics) €1k–€4k (preventive service) Primary running cost LN2 deliveries Electricity Which Option Fits Your Use Case? Limited electrical capacity: Nitrogen may be simpler to site if LN2 logistics are feasible. Avoid cryogen supply: Electric units remove LN2 deliveries and inventory handling. High throughput: Compare cycle times, pre-cool, and session stability across models. Final Thoughts Total cost of ownership includes the machine, room prep, training, warranty, and ongoing operating costs. Map these against your expected session volume and pricing to understand payback and long-term value. A clear plan for installation, staffing, and service will help ensure smooth operations from day one. Important Notes Cryotherapy systems are intended for general wellness and recovery support. They are not medical devices unless clearly stated and are not designed to diagnose, treat, cure, or prevent any disease. Always follow manufacturer guidelines and applicable safety standards for installation and operation. ```0

Cryosaunas are used in wellness and recovery settings to deliver very cold air for short sessions. Two main technologies are common today: electric cryosaunas and nitrogen-cooled cryosaunas. While both aim to create a similar user experience—brief, controlled cold exposure—the way they generate and manage cold is different. This guide explains how each system works, key pros and cons, and what to consider when choosing between them. How Each System Works Nitrogen-Cooled Cryosauna These systems use liquid nitrogen (LN2) that expands into cold gas. The cold nitrogen gas is introduced into the cabin to reduce air temperature rapidly. The cabin is typically open at the top with the user’s head outside, and the operator controls flow and exposure time. Electric Cryosauna Electric models use high-performance refrigeration compressors and heat exchangers to chill air mechanically—no cryogen is required. They operate like an industrial-grade freezer system designed for rapid pull-down and stable, repeatable temperatures throughout the session. Operating Temperatures & Session Profile Target temperatures: Both technologies aim for very low air temperatures in the cabin. The exact figures vary by manufacturer and model. Duration: Typical sessions are short (often around 2–3 minutes), with pre-cooling time managed by the machine. Stability: Electric units focus on repeatable mechanical cooling; nitrogen units can deliver rapid cold via gas expansion. Installation & Site Requirements Nitrogen-Cooled Supply: Requires a reliable liquid nitrogen supply and safe storage of LN2 tanks or a dewar. Ventilation: Must follow ventilation and oxygen monitoring best practices due to nitrogen displacing oxygen in enclosed spaces. Footprint: Cabin, storage area for LN2, and a service zone for tank changeovers. Electric Power: Requires sufficient electrical capacity per the manufacturer’s spec (often 3-phase). Ventilation: Generally simpler ventilation needs, though room airflow and heat rejection should be considered. Footprint: Main unit plus space for service access; no cryogen storage needed. Operational Considerations Nitrogen-Cooled Running costs: Ongoing LN2 deliveries factor into cost per session. Logistics: Requires scheduling deliveries and managing inventory of cryogen. Training: Staff should be trained on safe handling of LN2 and oxygen-safety practices. Electric Running costs: Primarily electricity and routine mechanical maintenance. Consistency: Emphasis on programmable, repeatable sessions. Uptime: Preventive maintenance on compressors and refrigeration components is important. User Experience & Workflow Session feel: Both approaches create intense cold exposure for a short, controlled duration. Turnover: Pre-cooling and recovery times impact how many sessions you can run per hour; check the specific model’s cycle time. Staffing: Many operators oversee sessions, handle intake questions, and ensure user comfort and safety protocols are followed. Safety & Compliance Screening: A basic pre-session checklist is common in professional settings to ensure suitability and comfort. Instructions: Users typically wear protective items (e.g., dry socks, gloves) and remove moisture before sessions. Environment: Follow the manufacturer’s location, ventilation, and monitoring guidance for the chosen system. Pros & Cons at a Glance Nitrogen-Cooled Pros: Rapid pull-down via LN2 gas; does not rely on high electrical capacity; commonly used in open-top cabins. Cons: Requires cryogen logistics and ventilation planning; ongoing LN2 cost; staff training for handling LN2. Electric Pros: No cryogen supply; predictable, programmable cooling; simplified inventory logistics. Cons: Higher electrical requirements; adherence to preventive maintenance on refrigeration components. Quick Comparison Aspect Nitrogen-Cooled Cryosauna Electric Cryosauna Cooling Method Liquid nitrogen expands to cold gas Mechanical refrigeration (compressors) Site Needs LN2 storage, ventilation, O2 monitoring Adequate power, room airflow/heat rejection Running Costs LN2 deliveries and handling Electricity and routine maintenance Logistics Tank changeovers, delivery scheduling No cryogen supply chain required Session Control Operator-managed nitrogen flow & timing Programmable profiles; repeatable sessions Which One Should You Choose? Your best choice depends on location, utilities, staffing, and operational goals. If you prefer to avoid cryogen logistics, an electric unit may fit better. If electrical capacity is limited but you can manage LN2 safely, a nitrogen-cooled unit can be effective. Always review the exact specifications and site requirements of the model you’re considering. Important Notes Cryosaunas are intended for general wellness and recovery support. They are not medical devices unless clearly stated and are not intended to diagnose, treat, cure, or prevent any disease. Users should follow manufacturer instructions and consult a professional if they have health concerns or specific conditions.

Red light therapy has quickly become one of the most talked-about tools in the wellness and recovery space. From fitness professionals to everyday users, people are drawn to its potential to support energy, recovery, and balance. But what is it really about, and how can you use it in a safe and effective way? Let’s explore the key things you should know before adding red light therapy to your routine. What Is Red Light Therapy? Red light therapy uses specific wavelengths of light that interact with the body at a cellular level. These wavelengths are linked to supporting natural processes like energy production, circulation, and general tissue comfort. While it is not a medical treatment, many wellness enthusiasts find that consistent use supports their recovery and daily performance. Why People Use It Energy & Vitality: Helps support cellular energy production for better performance throughout the day. Recovery & Comfort: May assist in easing post-activity muscle soreness and general stiffness. Skin & Appearance: Associated with supporting collagen activity, promoting a fresher look over time. Sleep & Relaxation: Gentle red light use in the evening can support natural circadian rhythms. What Wellness Professionals Recommend Professionals in fitness, wellness, and recovery emphasize three key points when it comes to red light therapy: Consistency matters: Short, regular sessions are often more effective than occasional long ones. Start simple: Begin with a few sessions per week and adjust based on how you feel. Combine with healthy habits: Good nutrition, sleep, and hydration all help maximize benefits. How to Use It Safely Most devices are designed to be safe for home use. Always follow your product guidelines, use protective eyewear if recommended, and keep a comfortable distance from the device. Red light therapy is considered safe for general wellness, but it’s important to remember it is not a replacement for medical care. Who Should Consider It Red light therapy can be used by people interested in recovery, performance, or maintaining wellness routines. Whether you are active in sports, managing a busy lifestyle, or simply looking for tools to support balance and energy, red light therapy can be a practical addition. Final Thoughts The real deal on red light therapy is simple: it is a promising wellness tool that supports energy, recovery, and vitality when used consistently. For those looking to build a sustainable wellness routine, it can be a valuable addition—but it works best when paired with healthy lifestyle practices. Important Notes Red light therapy devices from Martinsson Labs are intended for wellness support only. They are not medical devices and are not designed to diagnose, treat, cure, or prevent any disease. If you are pregnant, have a health condition, or take medication, consult your physician before starting new wellness practices. Explore our collection of panels, blankets, and mats to bring red light therapy into your own wellness routine.